Slit label – Barcode expressed by slits on substrate

Specification

Material	Stainless steel SUS304, 316, Ceramic, Fluororesin
Thickness	Choose from 0.1～2.0mm
Weather resistance	No change after 500 hours of salt spray test and 4,000 hours of weather meter test (equivalent to over 10 years)
Mounting	Screw, spot welding, pocket insert, etc.
Barcode	Available for 1D barcode

Features

Heat resistance

The maximum operating temperature is 1,000°C in an oxidizing atmosphere and 1,600°C in a reducing atmosphere.

Chemical resistance

By selecting the label material, it can withstand not only acids and high-temperature alkalis, but also oils, solvents, salt water, and some acids.

Shock resistance

Resistant to the mechanical impact of the blasting process to some extent

Painting process

By selecting the label material, it is difficult for paint to adhere and it is possible to minimize the deterioration of readability.

Reading

Since labels are read by a difference in the optical reflectance between slits and non-slits, the reflection from the back of label causes noise. Proper spacing is required between the back of the label and the product. Some limitations apply to barcode readers. Consult with us for selection of barcode reader.

Applications

High temperature and high density alkaline treatment processes for tempered glass Carburization treatment processes for auto parts Hardening processes for metallic products High pressure and high temperature treatment processes for cement products Blasting processes of metallic products Automobile painting processes